Garage frame — members at true section size

frame-20260920.01-beam-scheme.compas.json · every member extruded as its actual cross-section, in inches · loft live 100 psf · wind 96 mph Exposure C
Existing garage shown ghosted; the roof is red where a new member passes through it

Cabinet layout puts the deck, the east wall and everything stored on it in; tick Hide existing roof with it to see down into the loft.
9,718 lb completed frame, members only
1,671 lb removable, 17% of the frame
0 members deleted together and re-verified
19 sections verified one or more sizes lighter

Colours in “what to do with it”

This is an engineering study, not a construction document. Connections, base plates, anchorage and foundations are not designed or checked. Section sizes for members the geometry model records only as a “concept envelope” are assumed at the lightest standard wall. Nothing here may be built from until a California-licensed structural engineer has reviewed, signed and sealed the design.

Cabinet layout

Press Cabinet layout above the model: the floor and the east wall go in, the existing roof comes off, and everything that stands on the loft appears with its label. Items stand on the deck at z = 111.25 (beam top plus 3/4 in. plywood). Clearance is measured from each item's south top edge to the underside of the rafters above it; under the slope the roof panel itself sits 3.5 in. higher, on top of the rafters.

#sizex (east) y (north)top zraftersto clear, move roof over it
1Cabinet4 × 2 ft × 72 in.137.5 → 185.571 → 95183.25clears by 4.61 in.under a rafter
2Cabinet4 × 2 ft × 72 in.89.5 → 137.571 → 95183.25clears by 4.61 in.under a rafter
5Cabinet2 × 4 ft × 64 in.-32 → -8209 → 257175.25clears by 48.75 in.under a rafter
B1Crate2.16667 × 4.16667 ft × 46 in.183.5 → 209.521 → 71157.25clears by 5.25 in.between, 11.9 in. slack
M1Machine2 × 4 ft × 40 in.99.5 → 123.523 → 71151.25clears by 12.4 in.between, 13.4 in. slack
M2Machine2 × 4 ft × 40 in.123.5 → 147.523 → 71151.25clears by 8.9 in.under a rafter
S1Shelving2 × 7.5 ft × 90 in.185.5 → 209.586 → 176201.25clears by 22.75 in.under a rafter
S2Shelving2 × 7.5 ft × 90 in.185.5 → 209.5176 → 266201.25clears by 22.75 in.under a rafter
S3Shelving2 × 7.5 ft × 90 in.112.75 → 136.75176 → 266201.25clears by 22.75 in.under a rafter
C1Compressor
California Air Tools 10020C Ultra Quiet, 10 gal
⌀18 × 36 in.147.5 → 165.529 → 47147.25clears by 19.87 in.between, 19.4 in. slack
DCMachine
dust collector — envelope assumed, 24 × 36 × 60 in.
3 × 2 ft × 60 in.147.5 → 183.547 → 71171.25clears by 2.76 in.under a rafter
D1Machine
Rong Fu RF-30, 30 mm mill/drill on a stand
3 × 2 ft × 72 in.100.75 → 136.75152 → 176183.25clears by 40.75 in.under a rafter
CNCMachine
Shapeoko 5 Pro 4x4 bed, parked; 30 in. rolling stand
5 × 3.83333 ft × 37 in.3.75 → 63.7512 → 58148.25clears by 5.55 in.under a rafter
CNCgMachine
Shapeoko gantry, parked at the north end
5 × 1.08333 ft × 53.25 in.3.75 → 63.7558 → 71164.5clears by 15.86 in.under a rafter
PWBattery
Tesla Powerwall 3, 291 lb, wall mounted
0.633333 × 2 ft × 43.5 in. · wall mounted-32 → -24.4185 → 209166.75clears by 57.25 in.under a rafter

Move one by editing its row in structural-analysis-v6/cabinets.py; the labels stay put.

Walkway

17 tiles, 146 sq ft of floor kept clear, drawn a shade cooler than the deck with a tread pattern. Nothing in the item list may stand on one — the layout fails to build if it does. Tiles are 3 ft nominal: each run is divided into whole tiles as near 3 ft as its own length allows, so tile sizes differ between runs. One is genuinely short — T6 is 21 in. deep, because the gap between the east run and B-1 is only 21 in. and a step there is worth more than a tidy number.

tilesrunsize
T1stair headoff the top step, in the west strip1 × 35.75 × 36 in.
T2stair headthe corner: east of T1, north of the landing1 × 36 × 36 in.
T3landingsouth of the corner, onto the east run1 × 36 × 33 in.
T4, T5, T6, T7east runeast from the landing to the shelving4 × 36 × 33 in.
T8, T9spurnorth off the east run to the loading area2 × 36 × 33 in.
T11, T12, T13, T14shelving runup the west face of S1 and S2 to the north wall4 × 36 × 34.5 in.
T15, T16, T17, T18loading area6 ft x 6 ft inside the north opening, out to the N-M post line4 × 36 × 36 in.

Stored load

Machines and the battery are at their stated weights. Everything else — cabinets, shelving, the crate — is stored goods at 12.13 lb per cubic foot of its envelope.

#heightweight fromsq ftpsf
S1Shelving90 in.1,365 lbdensity15.0091.0
S2Shelving90 in.1,365 lbdensity15.0091.0
S3Shelving90 in.1,365 lbdensity15.0091.0
1Cabinet72 in.582 lbdensity8.0072.8
2Cabinet72 in.582 lbdensity8.0072.8
5Cabinet64 in.518 lbdensity8.0064.7
B1Crate46 in.420 lbdensity9.0346.5
D1Machine72 in.300 lbgiven6.0050.0
CNCMachine37 in.300 lbgiven19.1715.7
PWBattery43.5 in.291 lbgiven1.27—
M1Machine40 in.250 lbgiven8.0031.2
M2Machine40 in.250 lbgiven8.0031.2
CNCgMachine53.25 in.100 lbgiven5.4218.5
C1Compressor36 in.70 lbgiven1.7739.6
DCMachine60 in.70 lbgiven6.0011.7
on the deck 7,536 lb 419 18.0
hung on the wall 291 lb into BW at the W3 line, not onto the deck

7,536 lb over 419 sq ft of deck — an average of 18.0 psf, 18% of the 100 psf the loft is designed for. The design live load corresponds to 41.9 kip on this deck; the stored kit is 7.5.

The average is not the test, though. Under the density rule the pressure an item puts on the deck is density × height — its plan size cancels — so it depends only on how tall the item is. That makes S1 the worst at 91.0 psf, and puts the 12.13 lb/ft³ ceiling at 8.24 ft of stacking: anything taller than that exceeds 100 psf locally however small its footprint. Nothing here is over 7.5 ft.